Latchways® Vertical System - How to Install to Lattice Towers, Clamp Bracket, Climbing Rail, Monopole & T-spine Ladder

This module is for persons who are required to carry out installations, inspections and use Latchways vertical systems within the Telecommunications or other sectors within industry who may require installing a climb path and a vertical fall protection system.

Note: This module requires completion of the mandatory half-day Prerequisites & Introduction module unless it was completed within the last 3 years. This additional module can be added to the basket during the online booking process.

MSA Latchways Logo

Course Contents

Install a vertical system to a steel monopole using a single fix method (drill and tap or bolt through)
Install a vertical system to a steel monopole using monopole clamps
Install a vertical system to a steel monopole using a T-Spine
Install a vertical system to a concrete monopole using clamps
Install a Latchways vertical system on a lattice structure
Install a vertical system to a lattice structure fitted with top and bottom anchor mounting plates
Install a Latchways vertical system to a circular hollow section ladder
Install a climb path using MonoStep
Install a climb path using MonoStep to a monopole

Learning Outcomes

Install a Latchways vertical monopole system on a suitable structure

Important

This module requires completion of the mandatory half-day Prerequisites & Introduction module unless it was completed within the last 3 years. This additional module can be added to the basket during the online booking process.

Course Assessment

Written assessment
Practical assessment

Download course overview

Half a Day
Min 3 Max 6 people
Training Academy or on-site
MSA Latchways Certificate
Valid for 3 years
Requires completion of mandatory Prerequisites & Introduction module within the past 3 years